VSTO Outlook Add-ins – Reference Leaks

Not too long ago I came across an annoying issue with my Outlook Add-in which creates a form region at the bottom of the contact and distribution list inspector windows. Apparently, if you edit certain fields (like check-boxes) when a VSTO add-in is loaded the reference count is not properly decremented which leaves the OutlookItem in an edited state.

To fix the issue you have to edit some auto-generated VSTO code and release the OutlookItem during a setup event like so:

private void RegionFactory_FormRegionInitializing(object sender, Outlook.FormRegionInitializingEventArgs e)

This block of code can be found in the region block labeled: #region Form Region Factory

Apparently, a Microsoft support engineer posted about this back in August of 2008, but I never came across it until after working with a different very nice MSDN support engineer.

The other day however, I realized that the trick above does not in fact work for Distribution List (IPM.DistList) form regions. Watch the following video for proof!

I contacted the very nice engineer who helped me before to re-open/create a support ticket about the issue. While waiting for a response however, I kept trying to fix the issue and finally did. I’m quite hopeful that my fix is not the best answer, as it’s truly a bizarre hack.

Take a look at the Designer code generated for your region. The IFormRegionFactory which creates an instance of the actual ImportedFormRegion does not need to return anything for the region to load. In fact, if you throw an exception from IFormRegionFactory.CreateFormRegion, the DistListItem is properly unreferenced when the inspector is closed.

You can watch the following video to see it in action!

VSTO Outlook Add-ins – Getting Contacts from Distribution Lists

A while ago I was tasked with creating an Outlook Add-in that enables a user to opt-in their contacts for synchronization with a KMBS product named Page Scope Enterprise Suite (PSES). Part of this add-in is to offer a panel at the bottom of every contact so they can be opt-ed in for synchronization like so:

Outlook Contact Form Region

As you can see this isn’t very fancy – two check-boxes to control if you want the email and/or fax addresses sent along to PSES. Naturally, there is also an option to opt-in distribution lists:

Outlook Distribution Form Region

This is of course where the fun began. In my personal opinion distribution lists were not properly implemented, or rather updated from earlier versions of Outlook. For instance, take a close look at the image above. Notice how a “fax” address is listed under the “E-mail” column? Do you also notice how it has the @ symbol? What in the world is going on here?

Another issue is how the ContactItem relates to the Recipient – or rather how you can obtain the actual contact from the item in the distribution list. Based on documentation we should be able to use the GetContact() method found a little ways down on the Recipient class.


Sadly however, this doesn’t work (for me at-least) no matter what I did. So after a decent amount of trial and error I was able to determine that a Recipient’s EntryID actually contains the the Contact’s EntryID.

For example:

Recipient.EntryID = "abcd-1234";
Contact.EntryID = "1234";

This is simplified of course as real ID’s are quite long. So to actually get the contact we should do this:

Outlook.Recipient r = DistListItem.GetMember(1);
string rid = r.EntryID;
rid = rid.Substring(rid.Length - 48);

Outlook.ContactItem c = Application.Session.GetItemFromID(rid, null) as Outlook.ContactItem;

Hopefully someone else will find this mess useful as I couldn’t find anything a year ago about these oddities and issues.

log4net PatternString

I’ve been using log4net since it was first available for Mono and barely know anything about it. To a certain extent you’ve got to love it because of that – it just works! The project is great, but development appears somewhat stagnant. Either way, I’ve never needed to know much more than basic configuration and how to get it monitored even though I’ve used it for daemons, client applications, Add-ins, etc.

Today however, I learned something! A while ago I needed to have the RollingFileAppender log to a varying location depending on Windows version (XP vs Vista/7). At the time I found posts showing me how to use variables within the “file” option like so:

<file value="${APPDATA}\Company\Product\logs\data.log" />

Not having looked at the log4net code this is either explicitly converted to a user’s roaming folder, or it is replaced as an environment variable. This works great for applications that should log per user, but what if I needed the “All Users” roaming folder on Windows? Neither ${COMMONAPPDATA} or ${ALLUSERAPPDATA} worked for me so I needed another option that would cut it.

Enter log4net.Util.PatternConverter

By extending this very simple class and implementing one method we can now do variable substitution. The syntax leaves a lot to be desired, but hey – it works!

<file type="log4net.Util.PatternString">
    <name value="sub" />
    <type value="SpecialFolderPathConverter, Assembly" />
  <conversionPattern value="%sub{ApplicationData}\Company\Product\logs\addin.log" />

With this setup now all I have to do is create the Assembly.SpecialFolderPathConverter class:

using System;
using System.IO;

namespace Assembly
    public class SpecialFolderPathConverter : log4net.Util.PatternConverter
        protected override void Convert(TextWriter writer, object state)
            // Option gets set to contents of {}
            if (String.IsNullOrEmpty(this.Option))

            try {
                Environment.SpecialFolder sf = (Environment.SpecialFolder)
                    Enum.Parse(typeof(Environment.SpecialFolder), this.Option, true);

            } catch (Exception) {

As you can probably see this class takes any string within the {} brackets following %sub and replaces it using Environment.GetFolderPath which is quite simple, and helpful.

Thank you log4net!

The Mighty “Success Exception”

For all those Java programmers who feel lonely in the land of .NET – here’s a class just for you!

using System;

namespace Biz.Your.Company.Goes.Here.Util
	public sealed class SuccessException : Exception
		public SuccessException() : base() 

		public SuccessException(string msg) : base(msg)

		public SuccessException(string msg, Exception exception) : base(msg, exception)

Mono Embedded – Your Own .NET Plugin

I’ve embedded either for fun or work a number of languages to see what hosting them in C is like – both for performance and ease of marshalling. So far I’m impressed with the internals of Mono, but feel like there’s a lack of proper GOTCHA’s documented anywhere. Some are spread out around the web, but most don’t directly state key points. As such, I’m going to be posted a few as I come across them.

WARNING: Some of this may not make complete sense without reading http://www.mono-project.com/Embedding_Mono first.

Creating Objects
Like the above docs day, all you really need to do is:

/* get handle for class from assembly */
MonoImage *image = mono_assembly_get_image(MonoAssembly*);
MonoClass *klass = mono_class_from_name(image, "Namespace", "Class");

/* instantiate class and call .ctor (as they're nothing more than methods) */
MonoObject *obj = mono_object_new(MonoDomain*, klass);
mono_runtime_init(obj); /* call .ctor w/out args */

Reusing Objects
If you need to reuse this new MonoObject instance EVER I would highly suggest calling mono_gchandle_new(MonoObject*, pinned) otherwise the GC will get to it before you want it again – I GUARANTEE THIS. The reason this happens is because objects created from your C code have no real “SCOPE”, so they’re collected quickly just like they were local variables in a method. Read the following link, it’s helpful:


As a side note, you can actually call methods on objects that have been collected as long as the methods usage of `this` is only limited to `this.GetType()` (or nearly static). Try it, you’ll get some really funny results!

Finding Methods
The MonoClass* struct contains (or points to) lots of lists of data. The methods of a class are essentially one big long list and each method (every single variation) is a different instance of MonoMethod*. Take a look at the following C# class:

namespace Test
	public class Foo
		public Foo()

		public void Log(int num)

		public void Log(string msg)

NOTICE: The Log method is overloaded!

One way to call Foo.Log(?) is like so:

/* get handle for class from assembly */
MonoImage *image = mono_assembly_get_image(MonoAssembly*);
MonoClass *klass = mono_class_from_name(image, "Namespace", "Class");

/* instantiate class and call .ctor (as they're nothing more than methods) */
MonoObject *obj = mono_object_new(MonoDomain*, klass);
mono_runtime_init(obj); /* call .ctor w/out args */

/* Get Log method from MonoClass that takes 1 argument
MonoMethod *m = mono_class_get_method_from_name(klass, "Log", 1);

/* create single argument */
void *args[1] = { mono_string_new(MonoDomain*, "Hello World"); };

/* last argument is to capture exceptions */
mono_runtime_invoke(m, obj, args, NULL);

Any guess what might have just happened? Well, we just passed a string to the Log(int) method because mono_class_get_method_from_name returns the first one it finds, and not the one based on the type. To fix this you could write your own method which loops through MonoMethod*’s and find the correct signature or use the helper methods:

#include <mono/metadata/debug-helpers.h>

MonoMethodDesc *d = mono_method_desc_new(":Log(int)", FALSE);
MonoMethod *m = mono_method_desc_search_in_class(d, klass);

The mono_method_desc_* functions are extremely helpful and remove some of the crazy and changing internals – so I’d suggest using them for much of your calls.

Here are some further examples of the string descriptor for mono_method_desc_new:

  • Namespace.Test:Log(string) -> find Log method in Test class (requires second argument to be TRUE)
  • :Log(string) -> find Log method which takes a string
  • :Log(XmlReader) -> find Log method which takes an XmlReader
  • :Log(My.Namespace.XmlReader) -> find the method which takes YOUR funky XmlReader

As you can see it covers the gamut – so thank you to whomever created that extremely useful class/struct/function-set.

~ Till next time!

Mono + SCGI

Over a year ago I started a SCGI daemon for Mono (scgi-mono-server). For those who don’t know, the “SCGI protocol is a replacement for the Common Gateway Interface (CGI) protocol. It is a standard for applications to interface with HTTP servers. It is similar to FastCGI but is designed to be easier to implement”.I stopped all development shortly after I started because lighttpd (the web server I cared about) required a very small patch to be useful. Having supplied the patch I waited around for it to be rolled into a release (1.4.20) and then waited for it to be picked up by Ubuntu, but it still hasn’t. So what brought it back to life? A silly bug: https://bugs.launchpad.net/ubuntu/+source/mod-mono/+bug/227781.

Some of our servers need both PHP5 & Mono to run side-by-side so one of our guys listed the options:

  • Pull mono & mod-mono 1.9.1 back-ports from a PPA (http://ppa.launchpad.net/directhex/ppa/ubuntu)
  • Patch and rebuild mod-mono 1.2.5 ourselves
  • Switch to FastCGI for PHP5, so we can use apache2-mpm-worker for mod-mono-server
  • Switch from Apache to lighttpd (and rebuild with our patch)
  • Switch from Apache + mod-mono to Apache + FastCGI or SCGI (requires patching lighttpd)
  • Switch from Apache + mod-mono to Apache + mod_proxy for XSP

Given our growing dislike for Apache & appreciation for lighttpd we decided on a phased approach:

  • Switch PHP5 to Apache + FastCGI
  • Switch Mono to Apache + SCGI
  • Run for a while (make sure everything works well)
  • Switch from Apache to lighttpd

We choose SCGI for Mono over FastCGI because:

  • FastCGI requires a lot of chatter between the client & server
  • Great incentive to finally give the server to Mono

With our approach in mind I started working on scgi-mono-server again, but with a new target – Apache. This shouldn’t have been very hard given that mod_scgi is provided by Quixote, but there were a few stumbling blocks. Apache, for whatever reason, has decided to break the SCGI specification (in my eyes). As stated in the Protocol: “[t]he format of the response is not specified” – meaning whatever the SCGI server sends back to the client (Apache, lighttpd, etc) should go back to the originator (web browser). Apache however, does not honor this.

The first line of any HTTP response (AFAIK) should be it’s Status Line:

HTTP/1.1 200 OK.

Apache’s mod_scgi requires that all lines until the body have a colon so that is can parse the header and update it’s internal data model. Therefore, our first line now has to be replaced by:

Status: 200 OK

Thankfully the Example section of the protocol showed me how to fix the issue. I’m tempted to patch Apache/mod_scgi but I’m a bit worried about how many SCGI servers require this broken code. So for now I’ve added a configuration option that can be put inside ASP.NET’s web.config to control the hack:

	<add key="MonoServerApacheStatus" value="true" />

I’ll be submitting the server back to Mono with some documentation after it goes through some solid developer testing on our side – so I hope someone enjoys!

Programming Tutorial: Comments

Comments are only effective if they threaten abuse.

 * Note: The following array MUST be sorted in order for BinarySearch to work. I have taken the liberty of
 * creating it sorted to avoid this operation. If you really feel the need to break the manual sorting,
 * uncomment the array.sort below this, and then go out and stand in front of traffic. thank you.

string[] allowed_items  = {"activate", "restore", "save", "update-relay", "verify-mount", "verify-restore"}; 


if (Array.BinarySearch(allowed_items, list) >= 0) {
	/* -.v.- */

Discovered by Noah Massey.

Programming Tutorial: Covering All Your Bases

Make sure you cover all your bases when reseting variables:

if ($flag == "yes") {
	$form->creationDate = null;
	$form->runCount = 0;
	$form->statusCode = 1;
} else {   
	$form->creationDate = null;
	$form->runCount = 0;
	$form->statusCode = 1;

Discovered by @zewillow

Programming Tutorial: Unreachable Code

Always run non-existent commands after unreachable code.

if [ `id -u` != 0 ]; then
	sudo $0
	exit $?

if [ `dpkg -l | grep sun-java5 | wc -l` -eq 0 ]; then
	sh /media/cdrom0/application/appupgrade; # causes reboot
	sh /media/cdrom0/application/sysupgrade; # causes reboot

sudo updat-java-alternatives -s java-6-sun;

exit 0;

Discovered by Noah Massey.

Konica Minolta Canvas

At the end of the month I will be going to On Demand in Philly. I will be going to support my companies products and even help showcase a few of them. This quickly reminded me of Vision 2009 and the fun myself and some co-workers had waiting around to talk to customers. Instead of playing tick-tac-toe or Solitaire we used a product which will be released soon by KMBS. Simply put, the product is awesome. It has a lot of potential for growth, but at the moment it serves two purposes:

  1. Define Workflows for Printgroove
  2. Draw Process Diagrams

A normal workflow might look like:


You can also create cool diagrams – or in this case a Shipping Label:


However, with a little bit of creativity and boredom you can create some pretty crazy things:




Please note, these drawings are not my sole creation. They are the result of a few people in my department having fun.